1WT_6SSP_1_3m_2w_Molex: 1-Wire Temperature probe with 3m cable terminated by Molex Connector flush The thermistor element is epoxied

The thermistor element is epoxied into the tip of a rugged 8mm diameter Stainless Steel probe

The 10K_OAT outdoor air temperature sensor is used to measure the outside air temperature in order to implement control strategies that rely on actual outside conditions

the Exstreamer 110's display shows the track

IPv6 capable

Part #: Barix Exstreamer-105

1WT_6SSP_1_3m_2w_Molex: 1-Wire Temperature probe with 3m cable terminated by Molex Connector flush The thermistor element is epoxiedPart #: 1WT_6SSP_1_3m_2w_Molex This Stainless Steel 1 wire digital temperature probe uses a 3 meter long jacketed cable and is terminated by a popular Molex connector. Heat shrink is used to provide an additional seal and strain relief at the junction between the stainless steel tube and the sensor cable. Heat shrink is also used at the connector end to protect the wires that are terminated in the Molex connector. The 1 wire sensor element used is a